ONE STOP SHOP FOR ALL THINGS DIY
January 15, 2019
I am excited to feature a new build today by some amazing builders. M.E Refined Designs has built this amazing kids teepee bed and I am excited to be featuring the plans for it today on the blog. If I could be a kid again, I would definitely travel back to the future and ask for a bed like this.
Before we jump into the plans, make sure to go check out more of M.E Refined Design's work on all of their social media channels. (Instagram and Facebook). This Kids Teepee bed is just one of the many cool projects they've made.
There are some affiliate links in this post, meaning I get a small commission if you purchase through these links, at no cost to you. Click Here to read my full disclosure.
1- 2 x 4 @ 8ft
2 - 2 x 2 @ 8ft
3 - 1 x 6 @ 8ft
11 - 1 x 4 @ 8ft
See Detailed Plans for Cut List
Now lets get to it!
Step 1: Attach the (76") 1x6 to the two (8") 2x4s using a Kreg Jig K4 Pocket Hole System on a 1 1/2" setting, with 2 1/2" Pocket Hole Screws to attach along with wood glue. Repeat this step for the other side of the Kids Teepee Bed.
Step 2: Attach the two teepee bed sides together by attaching the (36") 1x6 using a Kreg Jig K4 Pocket Hole System on a 1 1/2" setting, with 2 1/2" Pocket Hole Screws to attach along with wood glue Repeat this step for the other side of the Kids Teepee Bed.
Step 3: Attach the (74") 2x2 to the outer sides of the kids teepee bed using a brad nailer and brad nails or wood screws. The 2x2 should be flush with the bottom of the 1x6 stretcher. Repeat this step for the other side of the teepee bed frame.
Step 4: Attach the 11 (39 1/2") 1x4 bed stretchers to the assembled bed frame using a brad nailer and brad nails. Each stretcher should have a 3.75" spacing in between each other.
Step 5: Assemble the teepee portion of the bed by attaching the (57 7/16") 1x4 to the (72") 1x4) using a Kreg Jig K4 Pocket Hole System on a 3/4" setting, with 1 1 1/4" Pocket Hole Screws to attach along with wood glue. Then attach the (14 9/16") 1x4 to the assembled teepee frame. The outside end of the 1x4s should be cut at 20 degrees and the inside of the 1x4s should be cut at 50 degrees.
Step 6: Attach the 1x4 stretcher to the two assembled teepee frames using a Kreg Jig K4 Pocket Hole System on a 3/4" setting, with 1 1/4" Pocket Hole Screws to attach along with wood glue.
Step 7: Fill all seen pocket holes with wood for a clean look. For help on how to easily fill pocket holes, check out my technique here.
and that's that!
I really love the simplicity of this build and the natural wood finish with the black tips is absolutely perfect.
Again, I am so excited to share this Awesome Kids teepee bed by M.E Refined Designs and if you are in the Hesperia, California area, they can even build one for you. Just go check out their site here. Be sure to go give them a follow and don't forget to share your builds with us.
Thanks for reading guys! XOXO Ashley
Your photo upload was successful. Please submit the following so that we may review and post your submission:
May 17, 2020
April 04, 2020
Sign up to get the latest on sales, new releases and more …