Entry Way Bench

So excited to share the plans for my entry way bench today! Such a fun piece to put in your Entry Way. The best part is you can build this fun piece for only $30 in lumber. You may be able to build it for less if you have some scraps lying around.

I have a SUPER small entry way in my house, but I couldn't deal with it being empty. This little bench fits perfectly in my little entry way space.

(There are some affiliate links in this post, meaning I get a small commission if you purchase through these links, at no cost to you. Click Here to read my full disclosure)

Dimensions

Materials List

2 - 1x6 @ 8ft

1 - 1x4 @ 6ft

2 - 2x4 @ 8ft

2 ½ Pocket Hole Screws

2" Screws

Cut List

2 – 2x4s @ 3ft

2 – 2x4s @ 17 5/8

4 – 2x4s @ 12 3/8"

2 – 1x4 @ 16 ¼"

1- 1x4 @ 26 5/8"

6 – 1x6 @ 28"

Step 1: Attach the (17 5/8") 2x4 leg to the (36") 2x4 leg by screwing the (12 3/8) 2x4 leg to them both using a Kreg Jig K4 Pocket Hole System on a 1 1/2" setting, with 2 1/2" pocket hole screws to attach along with wood glue. Repeat this step so that you have two legs.

Step 2: Attach the (12 3/8") bottom 2x4 braces to the existing legs using a Kreg Jig K4 Pocket Hole System on a 1 1/2" setting, with 2 1/2" pocket hole screws to attach along with wood glue. Do this step for both legs.

Step 3: Add (28") 1x6 legs to the bottom of the chair legs using 2" wood screws and wood glue. The 1x6 should hang off the edge of the legs by a 1/2". The 1st 1x6 should be flush with the back. Leave a 1/8" spacing between boards.

Step 4: Add (28") 1x6 legs to the top of the chair legs using 2" wood screws and wood glue. The 1x6 should hang off the edge of the legs by a 1/2". Leave a 1/8" spacing between boards.